Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
˜ Cleaning and maintenance
m
WARNING! Risk of injury!
Always switch the product off,
disconnect it from the mains and
let it cool down before performing
inspection, maintenance or cleaning
works .
m
WARNING! Risk of injury!
Risk of injury from moving dangerous
u
parts!
m
CAUTION!
Any maintenance and repair other than
u
described in this manual: Contact an
authorised service centre or a similarly
qualified person to check or repair the
product . Only use original parts .
NOTE
The following cleaning and servicing
u
should be done regularly . This will ensure
a long and reliable service life .
˜ Cleaning
m
WARNING! Risk of electric shock!
Do not spray the product with water and
u
do not immerse it in water .
m
WARNING! Risk of injury!
Be careful with the line cutter
u
cutter can cause serious lacerations .
NOTE
Do not use cleaning agents or solvents .
u
You may otherwise irreparably damage
the product .
Keep clean the ventilation slots, motor
o
housing and handles of the product . Use a
damp cloth or a brush .
16 GB/IE/NI
After every trimming session, remove grass
o
and soil from the protective cover
the trimming assembly .
˜ Maintenance
Prior to every use, check the product for
o
obvious defects such as loose, worn or
damaged parts .
Check covers and safety devices for
o
damages and correct installation . Replace
as necessary .
˜ Replacing the spool cap/line
spool
(Fig. G)
NOTE
u
u
u
Replacing the spool cap
1 . Unplug the mains plug .
2 . Hold the spool cap
and turn the spool cover
. The line
19 ]
[
3 . Remove the spool cover
the line spool
4 . Place the new spool cover
line spool
sure that the triangular markings
spool cover and the spool cap line up .
5 . Hold the spool cap
Screw on the spool cover
the
You can either replace the complete
spool cap
or only the line spool
[
18 ]
Check the line cutter
19 ]
[
product without a line cutter or with a
defective line cutter . If the line cutter is
damaged, contact our customer service .
Standard strings available from DIY stores
can also be used, allowing you to re-use
empty line spools (see "Technical data") .
The winding direction is indicated on the
line spool
.
16 ]
[
18 ]
[
direction .
.
[
16 ]
on the spool cap
[
16 ]
18 ]
[
direction .
and
8 ]
[
.
[
16 ]
. Never use the
firmly with 1 hand
in the
[
15 ]
together with
[
15 ]
with the
[
15 ]
. Make
18 ]
[
on the
15a ]
[
firmly with 1 hand .
by turning it in
15 ]
[
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
