Advertenties
Notices
General Information
Safety
Before commencing any work on the product, carefully read
through the operating instructions from start to finish, in particular
the section entitled "Safety" and the related safety advice. It is
important for you to have understood what you have read. This
product could prove hazardous if not used properly as directed or
in accordance with the regulations.
Any damage occurring as a result of noncompliance with these
instructions shall render the manufacturer's liability null and void.
ATTENTION
IMPORTANT SAFETY ADVICE
TO ENSURE THE SAFETY OF PERSONS, IT IS NECESSARY
TO OBSERVE THESE INSTRUCTIONS.
RETAIN THESE INSTRUCTION MANUAL.
ATTENTION
IMPORTANT INSTRUCTIONS TO ENSURE A SAFE
INSTALLATION.
PLEASE OBSERVE THESE INSTRUCTIONS.
INCORRECT INSTALLATION COULD LEAD TO SERIOUS
INJURIES.
Explanation of the symbols
WARNING: imminent danger
This symbol indicates that instructions are
being given which, if not observed,
could lead to serious injury
WARNING: DANGER DUE TO ELECTRIC
VOLTAGE. The works have to be done by an
electrican.
Attention! This symbol indicates that
!
instructions are being given which, if not
observed, could lead to malfunctions and / or
failure of the operator.
Spare parts
Only use genuine spare parts of the
manufacturer.Wrong or faulty spare parts
can cause damage, malfunctions or even
a total failure of the product.
Working safety
By complying with the safety advice and information provided in
these Operating Instructions, injury to persons and damage to
property whilst working on and with the product can be avoided.
Failure to observe the safety advice and information provided in
these Operating Instructions as well as the accident prevention
and general safety requirements relevant to the field of
application shall exempt the manufacturer or ist authorized
representatives from all liability and shall render any damage
claims null and void.
All manuals and user guides at all-guides.com
Hazards that may emanate from the product
The product has been subjected to a risk assessment. The
design and execution of the product based on this
corresponds to state-of-theart technology.
When used properly as intended, the product is safe and
reliable to operate.
Nevertheless, a residual risk will always remain!
The product runs on a high electrical voltage.
Before commencing any work on electrical
systems, please observe the following:
1. Disconnect from the power supply
2. Safeguard to prevent a power restart
3. Check that the electricity supply is cut off
Dismantling
Dismantling takes place in reverse sequence to the Installation
Instructions 7- 1.
Changes and modifications to the product
To prevent hazards and ensure optimum performance, no
changes, modifications or conversions may be made to the
product that have not been expressly approved by the
manufacturer.
Disposal
Observe the corresponding country-specific regulations.
Data plate
The data plate is located under the control panel cover.
Observe the specified power rating.
Packaging
Always dispose of the packaging in an environmentally-friendly
manner and in accordance with the local regulations on
disposal.
Producer:
Novoferm tormatic GmbH
Eisenhüttenweg 6
D-44145 Dortmund
GB
Advertenties
