Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7.6
Active noise
cancellation
The headphones feature active noise cancel-
lation (ANC: Active Noise Cancellation).
This means that the ambient noises have
been cleared by specifically generated
counter-signals.
•
The noise cancellation only works when
it is switched on.
•
Briefly press the NC 14 button to
switch on the function. The LED 15 is lit
white. An acoustic signal sounds.
•
If the function is switched on, briefly
press the NC 14 button to switch the
function off. The LED 15 goes out. A tri-
ple acoustic signal sounds.
7.7
Calls via Bluetooth
If the device is connected to a smartphone it
is possible for you to accept phone calls.
NOTES:
•
For some mobile telephones you have
to choose Bluetooth as the audio source
when accepting a call.
•
Music playback is automatically
paused when a call is received. Play-
back resumes after the call ends.
•
Not all functions are supported by all
mobile telephones.
1. Press the O 6 button briefly to accept
the call.
2. Adjust the volume during the phone call
using the buttons
3. Press the O 6 button briefly during the
phone call to end the call. If you have
accepted the call while the music was
playing, the song will continue to be
played after ending the phone call.
10 GB
+
–
5 and
7.
7.8
Interruption of the
connection
The connection is interrupted if ...
... one of the devices is switched off;
... the Bluetooth function is switched off;
... the range (approx. 10 metres) is ex-
ceeded.
7.9
Playing music back
using the cable
NOTE: playback via a cable has priority
over the Bluetooth connection. A possibly ex-
isting Bluetooth connection will be interrupted
when the 3.5 mm jack cable 16 is plugged
in.
1. Plug one jack plug of the 3.5 mm jack
cable 16 into the headphone socket of
the sound source (e.g. smartphone,
MP3 player) and the other jack plug
into the jack socket 10 on the device.
2. Switch on the audio device.
3. Start playback on the audio device. The
sound is reproduced via the head-
phones. Playback and volume are con-
trolled on the audio device.
8. Transport
The headphones can be folded to save
space.
1. Figure A+B: place the headphone
earcups 2 and 4 in the position shown
in Figure B by pushing them in.
2. Figure C: fold the headphone
earcups 2 and 4 inwards into the head-
set 3.
Advertenties
Hoofdstukken
Inhoudsopgave
