Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
7. Operation
7.1
Switching headphones
on/off
NOTE: the headphones switch off automat-
ically ...
... after approx. 5 minutes without any
connection to an audio device.
... if the battery is too weak.
•
To switch the headphones on or off,
press and hold the button
for approx. 5 seconds until an acoustic
signal sounds.
7.2
Establishing a Bluetooth
connection
NOTES:
•
The identification of the device is Rhythm
On-Ear ANC.
•
After switching on, the device automati-
cally tries to reconnect to the last paired
device.
•
Please note that the establishment of the
connection may vary slightly depend-
ing on the device and the software
used.
•
The device switches off if no Bluetooth
connection is established within ap-
prox. 5 minutes.
•
If you want to connect the headphones
to a computer, you may need to set the
sound input in the operating system in
order to use the headphone micro-
phone for use in chat programs, for ex-
ample.
•
If you pass the device on to someone
else, in order to protect your data and
your privacy, you should disconnect the
Bluetooth connection to the device and
8
GB
delete it from the connection list on your
smartphone.
1. Press and hold the button
prox. 5 seconds to switch on the de-
vice. An audio signal sounds. The
LED 9 starts flashing red/blue while the
connection to the audio device is being
established. The headphones now
transmit the identification.
2. Switch on the audio device (e.g. smart-
phone) and start the Bluetooth connec-
tion.
on/off 13
3. If necessary, start the Bluetooth connec-
tion on the audio device (e.g. smart-
phone, MP3 player). The audio device
will now receive the device identifier
Rhythm On-Ear ANC.
4. Establish a connection to the head-
phones on the audio device. If you are
asked for a password, enter "0000".
When the devices are connected, the
LED 9 flashes blue and an audio signal
sounds.
NOTE: usually, audio devices remember the
identification of the device. In this case, it
may not be necessary to establish the con-
nection manually again if the Bluetooth func-
tion is activated.
5. Start the playback of a music track on
the audio device. The sound is played
by the headphones.
7.3
If a connection to an audio device cannot be
established or the headphones remain si-
lent, perform the following steps:
1. In the device list on the audio device,
delete all entries from Rhythm On-Ear
ANC.
2. Switch on the headphones.
3. Pair the headphones as described.
No connection to the
audio device
13 for ap-
Advertenties
Hoofdstukken
Inhoudsopgave
