Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
5) Maintain power tools and accessories.
Check for misalignment or binding
of moving parts, breakage of parts
and any other condition that may
affect the power tool's operation.
If damaged, have the power tool
repaired before use. Many accidents are
caused by poorly maintained power tools .
Keep cutting tools sharp and
6)
clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and
are easier to control .
7) Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation .
8) Keep handles and grasping surfaces
dry, clean and free from oil and
grease. Slippery handles and grasping
surfaces do not allow for safe handling and
control of the tool in unexpected situations .
Service
Have your power tool serviced by
1)
a qualified repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained .
˜ Additional safety instructions
for paint spray guns
Keep your work area clean, well lit
and free of paint and solvents, cloths
and other inflammable materials.
Possible risk of spontaneous combustion . Have
a fully functioning fire extinguisher available at
all times .
Ensure adequate ventilation in the
spray zone and sufficient fresh air in
the entire room. Evaporation of flammable
solvents will cause an explosive environment .
10 GB/IE/NI
The product is only suitable for use
with non‑inflammable materials. Use
materials based on water, non‑volatile
hydrocarbons or similar materials. The
evaporation of volatile solvents will cause an
explosive environment .
Do not spray near ignition sources
such as static electric sparks, open
flames, ignition flames, hot items,
motors, cigarettes or sparks caused by
plugging in/unplugging power cables
or by operating switches. These ignition
sources could ignite a fire in the environment .
Do not spray any material if you do
not know whether it is potentially
dangerous. Unknown materials can cause
hazardous conditions .
Wear additional personal protective
equipment such as suitable gloves
and a protective mask/respirator
when spraying or handling chemicals.
Wearing appropriate protective equipment
for the conditions reduces your exposure to
dangerous substances .
Be aware of the potential hazards of
the sprayed material. Take note of
the markings on the container and
the manufacturer's information on
the sprayed material, including the
instructions to use personal protective
equipment. The manufacturer's instructions
are to be followed to reduce the risk of fire or
injuries caused by poisons, carcinogens, etc .
Do not use the spray gun to spray flammable
substances . Do not clean spray guns with
flammable solvents .
m
WARNING!
Be aware of the hazards that may be caused
u
by the substance being sprayed .
Observe the labels on the containers or the
u
instructions given by the manufacturer of the
substance .
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
