Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6) If operating a power tool in a
damp location is unavoidable, use
a residual current device (RCD)
protected supply. Use of an RCD reduces
the risk of electric shock .
7) If the replacement of the supply cord
is necessary, this has to be done by
the manufacturer or his agent in
order to avoid a safety hazard.
Personal safety
Stay alert, watch what you are
1)
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury .
2) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non‑skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries .
3) Prevent unintentional starting. Ensure
the switch is in the off‑position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power tools
that have the switch on invites accidents .
4) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury .
5) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations .
Dress properly. Do not wear loose
6)
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts .
If devices are provided for the
7)
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. The
use of dust collection can reduce dust‑related
hazards .
8) Do not let familiarity gained from
frequent use of tools allow you to
become complacent and ignore tool
safety principles. A careless action can
cause severe injury within a fraction of a
second .
Power tool use and care
Do not force the power tool. Use
1)
the correct power tool for your
application. The correct power tool will do
the job better and safer at the rate for which it
was designed .
2) Do not use the power tool if the
switch does not turn it on and off. Any
power tool that cannot be controlled with the
switch is dangerous and must be repaired .
3) Disconnect the plug from the power
source and/or a removable battery
pack from the power tool before
making any adjustments, changing
accessories, or storing power
tools. Such preventive safety measures
reduce the risk of starting the power tool
accidentally .
4) Store idle power tools out of the
reach of children and do not allow
persons unfamiliar with the power
tool or these instructions to operate
the power tool. Power tools are dangerous
in the hands of untrained users .
GB/IE/NI
9
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
