Download Inhoudsopgave Inhoud Print deze pagina

Operation; Cleaning And Care; Troubleshooting - LIVARNO home HG10702 Bedienings- En Veiligheidsinstructies

Led-solarschijnwerper
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Slot the spotlight
2
from above (see Fig. D). After installing, check
that the spotlight
2
Positioning the spotlight
Tilt and turn the spotlight
position (see Fig. E). The spotlight
turned by up to 65° horizontally.
Positioning the solar panel
Tilt and turn the solar panel
position (see Fig. E). The solar panel can be
turned by up to 90° horizontally.
Cardinal direction:
Orientation towards the south is optimum. Orientations
with slight deviations towards the west are preferable
to those with slight deviations towards the east.

Operation

The product have four modes. Each mode is selected
by means of the switch
Mode 1 (AUTO):
Press the switch
one time to activate Mode 1.
3
The product will switch to a mode with motion
sensor function only. The product only switch
on when motion sensor detects movement in
darkness. Approx. 30 seconds after the last
movement has been detected, the light will
switch off. LEDs light up at full power in this
mode.
Mode 2 (NIGHT LIGHT + AUTO):
Press the switch
3
The product will keep night light constantly lit
up in darkness. As soon as the motion sensor
detects movement, the product will switch to
motion sensor light, where the LEDs light up at
full power. Approx. 30 seconds after the last
movement has been detected, the product will
return to functioning as a constantly lit up night
light.
onto the wall bracket
is fitted securely.
to the desired
2
can be
2
to the desired
1
(see Fig. A).
3
again to activate Mode 2.
Mode 3 (50 % ON):
4
Press the switch
The product will be switched on with a bright-
ness of 50 % in darkness. The motion sensor is
inactive in this mode.
Mode 4 (OFF):
Press the switch
product.

Cleaning and care

Switch off the product before cleaning.
Check the solar panel
that it is not dirty.
Keep the product free of snow and ice in winter.
Clean the product with a lint-free, lightly mois-
tened cloth and a mild cleaning agent.

Troubleshooting

Fault
The product
does not
switch on.
The light
flickers.
The recharge-
able battery
is discharged
within a short
period.
again to activate Mode 3.
3
again to switch off the
3
regularly to ensure
1
Cause
Solution
Press the
The switch
3
switch
is in the OFF
to switch on
mode.
the product
(see section
"Operation").
The recharge-
Charge the
able battery is
rechargeable
empty.
battery.
The recharge-
Charge the
able battery is
rechargeable
almost empty.
battery.
The solar
Clean the
panel
is
solar panel
1
dirty.
The solar
Realign the
panel
is
solar panel
1
incorrectly
aligned.
GB/IE/NI
3
.
1
.
1
9

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

437316 2304100372495

Inhoudsopgave