Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
GB
IE
NI
Control elements
Familiarise yourself with the operating ele-
ments before using the device for the first
time.
• Direction of rotation switch (6)
NOTICE! Only operate the direction
of rotation switch when the tool has
stopped!
The arrow on the direction switch (6) in-
dicates the working direction.
•
Screw in screw, drill
• Centre Switch lock
•
Unscrew screw
• Torque adjustment ring (3)
Setting the maximum screwing torque
at which the slip clutch triggers.
NOTICE! Only operate the torque
adjustment ring when the tool has
stopped!
• Screwing: Level 1 - 20
• Drilling: Level
• Impact drilling: Level
• For safety, start screwing at low
torque. Increase the torque as re-
quired.
• Gear selector switch (4)
NOTICE! Only operate the gear select-
or switch when the tool has stopped.
• 1
Screwing
• 2
Drilling
• On/Off switch (10)
• Switching on: Press
• Control the speed progressively: The
further you press the on/off switch,
the higher the speed.
• Switching off: Release
Attaching and removing the
attachment tool
Notes
• Chuck capacity: 1,5-13 mm
12
• The direction of rotation is engraved in
the keyless chuck (2).
• Directional data viewed from behind.
• There is a magnet (5) on the left and
right of the housing. You can attach
one bit at a time to the magnet.
Attaching the attachment tool
1. Open the drill chuck: RELEASE➞
2. Push the attachment tool as far as pos-
sible into the drill chuck opening (1).
3. Clamp the attachment tool: ⬅GRIP
Removing the attachment tool
1. Open the drill chuck: RELEASE➞
CAUTION! Risk of burn injury!
2.
Attachment tools – especially drills –
can become very hot. Wear protective
gloves whenever appropriate.
Remove the attachment tool.
Fitting the auxiliary handle
Procedure (Fig. D)
1. Screw the auxiliary handle (13) on the
right or left into the holder for the auxil-
iary handle (11) on the device head.
2. Tighten the auxiliary handle (13) hand-
tight.
Checking the battery charge
level
LEDs
red, orange, green Battery charged
red, orange
red
1. Press the button (16) next to the
charge level indicator button (17) on
the battery (15).
The LEDs of the charge level indicator
show how much charge remains in the
battery.
Meaning
Battery partially
charged
Battery needs to be
charged
Advertenties
Hoofdstukken
Inhoudsopgave
