Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Removing the oven door
1. Open the front door (1).
2. Open the clips at the hinge housing (2) on
the right and left hand sides of the front door
by pressing them down as illustrated in the
5 Move the front door to half-way.
4, Remove the front door by pulling it upwards
to release it from the right and left hinges.
Moteps carried out during removing process
Should be performed in reverse order to
install the door. Do not forget to close the
clips at the hinge housing when reinstalling
the door.
Removing the door inner glass
The inner glass panel of the oven door can be
removed for cleaning.
In case of the cleaning for the inner glass pane;
ik
-following steps;
After removing the oven door, proceed to
Hinge housing |
Outer glass pane
Inner glass pane
Inmost glass pane
Spade
Pin
Pin housing
As illustrated in figure, raise the inmost glass
pane (4) slightly in direction A by means of
spade (5) until you hear a "click" and pull it
out in direction B.
Then clean the inner glass pane (3) surface
directly. No need to remove it from its
location.
After finishing to clean the outer glass pane
(2), the first step to regroup the door is
reinstalling inmost glass panel (4).
First locate the bottom part of the inmost
glass (4) into the hinge housing (1). Then
push the inmost glass upper side pins (6)
towards to the housing (7) until you hear a
"click".
29/EN
Advertenties
Hoofdstukken
Inhoudsopgave
