Product must be installed bya gualified person in
accordance with the regulations in force. The
manufacturer shall not be held responsible for
damages arising from procedures carried out by
unauthorized persons which may also void the
warranty,
Preparation of location and electrical
installation for the product is under
customer's responsibility.
he product must be installed in
accordance with all local electrical
regulations.
Prior to installation, visually check if the
product has any defects on it. If so, do not
have it installed.
Damaged products cause risks for your
safety.
Before installation
The appliance is intended for installation in
commercially available kitchen cabinets. A safety
distance must be left between the appliance and
the kitchen walls and furniture. See figure (values
in mm).
e
Surfaces, synthetic laminates and adhesives
used must be heat resistant (100 °C
minimum).
Kitchen cabinets must be set level and fixed.
lf there is a drawer beneath the oven, a
shelf must be installed between oven and
drawer.
e
Carry the appliance with at least two
persons.
Do not install the appliance next to
drefrigerators or freezers. The heat emitted
by the appliance will lead to an increased
energy consumption of cooling appliances.
he door and/or handle must not be used
for lifting or moving the appliance.
If the appliance has wire handles, push the
handles back into the side walls after
moving the appliance.
11/EN