Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
POST-VENTING
When the blower and the heating cartridge switch off, the venting
continues to operate during few seconds to preserve and optimize the
product life time.
Seconds appear and begin to count
down, the keypad is inactive du-
ring the post-venting.
BOOST DURATION GAUGE
In the device display, a selector indicates the boost duration level by po-
sitioning it in front of the colour: red, orange or green. So, depending on
the duration of the boost, you can choose your level of energy usage. As
the boost duration increases, the consumption will be higher.
The gauge appears in Boost, Auto, Comfort, Eco and Frost protection
modes and whatever the temperature level and depends of set duration
of boost.
Boost duration
C - Red colour
Long period of boost: it is
> 60 minutes
advisable to significantly
When the boost dura-
reduce the duration of
tion is longer than 60
boost.
30 minutes < Boost
B - Orange colour
duration ≤ 60 minutes
Average period of boost:
When the boost dura-
it is advisable
tion is longer than 30
to slightly reduce the
minutes and shorter or
duration of boost.
equal to 60 minutes
Boost duration ≤ 30
A - Green colour
When the boost dura-
Ideal duration.
tion is shorter or equal
to 30 minutes
SETTING THE COMFORT AND ECO MODE
TEMPERATURES
Set the Comfort mode temperature
You can access the Comfort temperature set up from the Auto and
Comfort Mode. It is preset to 19°C.
Using
and
you can adjust the temperature from 16°C to 19°C
by intervals of 0.5° C.
minutes
minutes
Set the Eco mode temperature
You can access the Eco temperature set up from Eco Mode. It is preset
to 15°C.
Using
and
you can adjust the temperature from 12°C to 15°C
by intervals of 0.5° C.
CONSUMPTION INDICATION
ACCUMULATED IN KWH, ENERGY
SAVINGS
It is possible to see the estimation of energy consumption in kWh since
the last reset of the energy meter.
Display of the estimated power consumption
To see this estimation, from Auto,
Comfort, Eco or Frost protection mode,
then press
.
To exit the display mode of
consumption: press any button, the
device is automatically in the previous active mode.
Resetting the energy meter
To reset the energy meter, from Auto, Comfort, Eco or Frost protection
mode, then proceed as follows.
1- Press
.
2- Press simultaneously
To exit resetting the energy meter, press any button, the device is
automatically in the previous active mode.
CHILD ANTI-TAMPER,
KEYPAD LOCK/UNLOCK
Keypad lock
To lock the keypad, press the
and
buttons and hold them
down for 10 seconds. The padlock
symbol
appears on the display,
the keypad is locked.
Keypad unlock
To unlock the keypad, press the
for 10 seconds again. The padlock symbol
play, keypad is unlocked.
Important: when the keypad is
locked, only the button (switch) is
active.
If the device is on Standby mode when the
keypad is locked, you have to unlock it for the
next heating on to access the setup.
1 2 3 4 5 6 7
and
for more than 5 seconds.
3
and
buttons hold them down
disappears from the dis-
M16MI325 A03_06/18
EN
5
Advertenties
Hoofdstukken
Inhoudsopgave
