Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
INSTALLER SETTINGS
ACCESS
You access to User settings in 4 steps:
From Auto, Comfort, Eco or Frost protection mode :
Information display
1
1
Press for 5
seconds
Setting sequence:
Configuration of detection modes
CONFIGURATION OF DETECTION MODES
Open window detection, activation/ deactivation of
the Auto mode
The automatic mode enabled is the default setting.
1- Press
or
.
On
= automatic mode enabled.
OFF
= automatic mode disabled.
2- To save and move automatically to the next setting, press
exit the user settings, press
Occupancy detection, activation/deactivation
1- The occupancy detection enabled is the default setting.
M16MI325 A03_06/18
Information displays
2
Press briefly
twice
PIN code lock
Restoring factory settings
3 times.
3
1
Press for 10
seconds
2- Press
or
ON
= occupancy detection enabled.
OFF
= occupancy detection disabled.
3- To save and move automatically to the next setting, press
exit the user settings, press
PIN CODE LOCK
Overview
Your heating device is protected by a safety code against nonauthorised
use. The PIN code (Personal Identity Number) is a
customisable 4 numbers code. When enabled, it prevents access to the
following settings:
- Selecting the Comfort mode : The access to the Comfort mode is
forbidden, only the Auto, Eco and Frost protection modes are available.
- Minimum and maximum Limits of the setting temperature range (the
Comfort temperature modification is forbidden out of the authorised
setting range).
- Programming mode.
. To
- Open window detection settings.
- Setting the Eco mode temperature.
- Setting the Frost protection temperature.
In addition to the version with occupancy detector:
- Occupancy detection settings.
3 important steps are needed for the first use of the PIN code lock:
1 - PIN code initialisation, enter the preset PIN code (0000) to access to
the feature.
2 - Activation of the PIN Code to lock settings which will be protected
by the PIN code.
3 - Customizing the PIN code, replace 0000 by the custmized code
InSt
= Installer
settings
.
5 sec.
3 times.
4
Press briefly
. To
14
Advertenties
Hoofdstukken
Inhoudsopgave
