Download Inhoudsopgave Inhoud Print deze pagina

Using The Device; Setting The Comfort Temperature; Setting The Eco Temperature - Thermor Emotion Installatie En Gebruikshandleiding

Straalpaneel
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Description of the control panel
B
A
-3,5°
V1
V1
V2
V2

Setting the comfort temperature

This is the temperature desired when the room is occupied.
1) Set cursor A to position
2) Adjust knob C to 5. The heating indicator V1 will illuminate if the temperature is below the des-
ired temperature.
3) Wait a few hours for the temperature to stabilise.
4) When you are happy with the setting (you may wish to use a thermometer to check), mark the posi-
tion once and for all.
If you are not happy with the setting, re-adjust it and proceed again from point 3).

Setting the Eco temperature

This involves a reduction in degrees compared to the Comfort temperature. We recommend that
you use this mode for periods of absence of more than 2 hours or overnight.
Warning: This reduction applies to the Comfort temperature so it is important to set the Comfort
temperature first, before setting the Eco reduction.
1) Set cursor A to position
2) Set the knob B to –3.5°, the heating indicator V1 will illuminate if the ambient temperature is
less than the desired Eco temperature.
3) Wait a few hours for the temperature to stabilise.
4) When you are happy with the setting (you may wish to use a thermometer to check), mark the posi-
tion once and for all.
If you are not happy with the setting, re-adjust it and proceed again from point 3).
NB: The measurement is set to –3.5°C in our laboratories. It is possible that the setting for the
reduction is not precisely –3.5°C, depending on your installation's particular characteristics. In this
case, adapt the setting to obtain the desired reduction.
Standby (Frost Free) Mode
It is the mode to maintain a temperature of approximately 7°C in the room in case of prolonged
absence from the house.
Set cursor A to position
U
SING THE DEVICE
C
5
V3
V3
, the indicator V3 lights.
, the indicator V2 lights.
.
15
A Mode cursor
B Eco reduction set value adjustment knob
(compared to the Comfort temprature)
C Comfort temperature set value adjust-
ment knob (between 4 and 5 is about 21°C
at he heater)
V1 Heating light indicator
V2 Eco mode light
V3 Comfort mode light
GB

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Thermor Emotion

Inhoudsopgave