Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18
OPERATION
Switching on
1. Insert the plug into the wall socket.
2. Turn the Temperature regulator
clockwise to a medium setting.
Switching off
To turn off the appliance, turn the
temperature regulator to the "0" position.
Temperature regulation
The temperature is regulated
automatically.
A medium setting is generally
the most suitable.
However, the exact setting
should be chosen keeping in
mind that the temperature
inside the appliance depends
on:
• room temperature,
• how often the door is
opened,
• the quantity of food stored,
• the location of the appliance.
DAILY USE
WARNING! Refer to Safety
chapters.
Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product, then
dry thoroughly.
Do not use detergents or
abrasive powders, as these will
damage the finish.
Temperature indicator
For proper storage of food the refrigerator
is equipped with the temperature indicator.
1. Turn the Temperature regulator toward
lower settings to obtain the minimum
coldness.
2. Turn the Temperature regulator toward
higher settings to obtain the maximum
coldness.
CAUTION! If the ambient
temperature is high or the
appliance is fully loaded, and
the appliance is set to the
lowest temperatures, it may run
continuously causing frost to
form on the rear wall. In this
case the dial must be set to a
higher temperature to allow
automatic defrosting and
therefore reduced energy
consumption.
The symbol on the side wall of the
appliance indicates the coldest area in the
refrigerator.
If "OK" is displayed (A), put fresh food into
area indicated by symbol, if not (B), adjust
the temperature controller to a colder
setting and wait 12 hours before checking
the temperature indicator again.
OK
A
OK
B
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
