Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Problem
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door gaskets. Contact the Service Force Center.
Technical data
Dimension of the recess
Rising Time
The technical information are situated in the rating plate on the internal left side of the
appliance and in the energy label.
Installation
Positioning
WARNING!
If you are discarding an old appliance that has a lock or catch on the door, you must ensure
that it is made unusable to prevent young children being trapped inside.
The appliance shall have the plug accessible after installation.
Install this appliance at a location where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Climate class
SN
N
ST
T
Possible cause
The door is not closed correctly. Refer to "Closing the door".
The temperature regulator is not
set correctly.
Height
Width
Depth
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C
Set a higher temperature.
1030 mm
560 mm
550 mm
26 h
Ambient temperature
29
Technical data
Solution
Advertenties
Hoofdstukken
Inhoudsopgave
