Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Troubleshooting
By purchasing this Mc Crypt DJ mixer, you have acquired a state-of-the-art product which operates reliably.
Nevertheless, problems or errors may occur.
Therefore, we would like to describe how to eliminate possible faults here:
Please observe the safety notes!
Device does not work after the POWER switch (10) has been switched on.
• The mains adapter is not plugged into the socket correctly > plug in mains adapter correctly
• The mains socket is not supplied with current > check mains socket
The mixer is turned on but no sound can be heard.
• No input signal > check source of signal
• Input level is set incorrectly > set level with the respective channel fader as described
No signal can be heard although the level display (9) indicates a signal
•
Downstream device (amplifier) not switched on or set incorrectly > check downstream device, select correct input
at amplifier, increase volume
• Mixer output is not or incorrectly connected > connect output as described above
A humming sound can be heard
• The record-player ground lines are not connected to terminal clamp GND (25) > connect the record player ground
cables to the terminal clamp GND (25)
• A buzz loop arises between the connected devices > connect signal earth by special isolated cables
A channel does not work
• Connection cable is loose > check connections between the devices
•
The balance control on the amplifier is out of adjustment > adjust balance control at the amplifier
All manuals and user guides at all-guides.com
39
Advertenties
Hoofdstukken
Inhoudsopgave
