Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connection and Control Elements
(6) INPUT SELECTOR CHANNEL 2 switch
See switch INPUT SELECTOR CHANNEL 1, but for channel 2.
(7) Channel fader CHANNEL USB
This control is used to set the volume of the MP3 player.
(8) OUTPUT SELECTOR Switch
Use this switch to determine whether the output signal is transmitted in stereo or mono.
MONO position = output signal is mono
ST position = output signal is stereo
(9) Level indicator
The level indicator shows the output signal level visually separated by channel.
Ensure that the output is not overloaded. The display should indicate no more than 0dB; short exceeding impulse peaks
are permissible. The red level indicator LEDs should only flash briefly
(10) POWER switch
The mixing desk is switched on or off using this switch.
Switch pressed = Device on
Switch not pressed = Device off
(11) POWER indicator
This display is lit when the mixing desk is switched on.
All manuals and user guides at all-guides.com
29
Advertenties
Hoofdstukken
Inhoudsopgave
