Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
All manuals and user guides at all-guides.com
Start-Up
Do not turn on the device before you have read and understood these operating instructions.
Check again that all connections are correct.
Switching the Mixing Desk On and Off
Not observing the following sequence when switching the mixer on and off could damage the
speakers or the amplifier.
Switching on the Devices
• Make sure that all channel faders (3, 5 and 7) are set to minimum volume (channel fader pulled right back to the
lowest point).
• First switch on the playback devices connected to the mixer.
• Turn the mixing desk on with the POWER switch (10).
•
Switch the connected amplifier on. The mixer is now ready for operation.
Switching off the Devices
•
To switch off the mixer, first slide all channel faders (3, 5 and 7) on the mixing desk all the way down and then set
the volume at the amplifier to a minimum.
•
Switch off the amplifier.
• Then, switch off the mixer using the POWER switch (10) and then the playback devices (record player, CD player
etc.).
• If you do not require the mixer for a longer period, unplug the power supply unit from the socket.
Recording Level Display
The recording level display (9) provides information about the output level.
The level on the indicator should not exceed the „0" dB value as otherwise distortion of the music signal can
occur. A short blinking or deflection beyond the „0" dB value in the case of signal peaks is not harmful.
36
Advertenties
Hoofdstukken
Inhoudsopgave
