FOLD UP
1. Remove the tablet holder (21) by unscrewing the fastening
screw (16) and taking out the tablet tray.
2. Unscrew the handle screws (1) a little so that the handles
(34) can be folded in (Attention! The handle screws do not
have to be unscrewed completely from the support tubes).
Fold in the handles (34) and fix them by screwing in the handle
screws (1) again.
3. Release the folding lever (53) on the right side of the tread-
mill.
4. Grip under the center of the computer (15) and carefully
lower it.
5. Fix the lying position by tightening the folding lever (53)
and make sure that the folding lever (53) is properly closed.
Attention! Before folding up the treadmill, switch off the tread-
mill and wait until the running surface is stationary. Do not op-
erate the treadmill when it is folded up!
TRANSPORT AND STORAGE
1. Unplug the power cord.
2. Lift the treadmill until it moves freely on the transport
wheels and push it to the storage location.
3. The treadmill can be stowed lying down or in standing
position.
15
34
STANDING STORAGE
1. Lift the treadmill until it moves freely on the transport
wheels.
2. When you reach the storage point, continue lifting until the
treadmill is resting on the front support points. Check that it is
standing securely.
Attention! When setting up the treadmill, the incline frame
(71) will jump out a little. This will cause the treadmill to
slide forward a little. This increases the support distance and
improves the standing stability of the treadmill.
Note:
Unplug the power cord if you do not intend to use the de-
vice for more than 4 weeks. Choose a dry storage location
in the house. Cover the device to protect it from discoloration
caused by possible sunlight and dust.
18
18
21
1
16
53
53
GB