Inhoudsopgave
Advertenties
Floor tool in use
The clean-water / chemical mix is dispersed via the 'THRU-FEED' system.
The waste water is then retrieved by the floor-tool.
28
29
Note: The machine will still reverse with the floor-tool in the lowered position, this could possibly damage the blades.
Raise the floor-tool before reversing.
Note: Care must be taken to reduce speed when cornering or when manoeuvring around obstacles.
Machine Operation
Overlap the scrubbing path by 10cm to ensure an even clean (Fig.28).
If streaking occurs, wipe the floor-tool blades clean (Fig.29).
Refer to (Page 26) to raise and lower the floor-tool.
Breakaway floor-tool
The floor-tool design incorporates a safety knock-off feature.
Allowing it to safely disengage from its mounting should it become
caught on an obstruction, during forward machine movement.
To re-attach the floor-tool blade to its holder, first loosen the retaining
knobs on the floor-tool body and slide onto the holding bracket.
Tighten retaining knobs to finger tight.
32
Advertenties
Inhoudsopgave
