Download Inhoudsopgave Inhoud Print deze pagina

EIBENSTOCK EZW 230 Gebruiksaanwijzing pagina 22

Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

AUXILIARY HANDLE
Normally auxiliary handle (A) is screwed on the machine left side. It can be
screwed also on the machine right side or top if this is more convenient for the
operator (see Fig.1).
The vibration-dampening auxiliary handle reduces the vibrations, making
operation more comfortable and secure.
Switching on and off
Always check the position of ON/OFF switch. The power tool must be
connected to the power supply socket only when this switch is in OFF position.
The angle grinder is secured against unintentional switching on.
Switching on:
First push forward the auxiliary button (B) positioned at the bottom (C) of the
main handle, then press ON/OFF switch.
For continuous operation switch can be locked. In this case while holding
switch, press button (B) and then release switch(C).
Switching off:
Release switch; in case the switch is locked, first press and then release
the switch(B).
In case of mains drop-out (or temporary drop-out for time t > 0.5 s), when
the ON/ OFF switch is in ON position, the machine should not operate
after supply recovering. To start operating the machine, first switch off
and then switch on the lever of ON/OFF switch
Attention!
The Cutting discs, spacer discs and the flange nut might heat up
enormously during operation. You could burn your hands or get cut or
ripped by the segments.
Therefore, always use protective gloves when changing the grinding
wheel.
Attention!
Before any work on the tool, disconnect the plug from the mains!
Pay attention to the dimensions of the grinding tools. The mounting hole
diameter must fit the mounting flange without play. Do not use reducers
or adapters.
For clamping and loosening the grinding tools, lock the grinder spindle with the
spindle lock button (E).
Changing the Cutting Discs
22

Advertenties

Inhoudsopgave
loading

Inhoudsopgave