Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
For the Installer
GENERAL
PUB2/PUB2 DS 160-500 is a series of accumulator
tanks/water heaters, suitable for connection to gas or
oil boilers.
The water tank consists of a steel jacket, with a copper
lining to protect against corrosion. PUB2/PUB2 DS 160-
500 is equipped with two copper coils.
PUB2/PUB2 DS 160-500 is designed and manufactured
for a maximum cut-off pressure of 10 bar. Maximum
permitted temperature is 90 °C.
The max. working pressure in the coil is 20 bar and the
max. working temperature in the coil is 120 °C.
On 500 L containers, the insulation is made of Neopor
and polyester fleece, which provides excellent heat in-
sulation. The insulation and the grey plastic outer clad-
ding can easily be removed to simplify moving the
product, for example through doorways.
On the other vessel sizes, the insulation is polyurethane,
which provides excellent heat insulation. The outer shell
is grey plastic.
PUB2/PUB2 DS 160-500 is equipped with submerged
tube for control of hot water heating.
TRANSPORT
PUB2/PUB2 DS 160-500 should be transported and
stored vertically in a dry place. The PUB2/PUB2 DS 160-
500 may, however, be carefully laid on its back when
being moved into a building.
PUB2/PUB2 DS 160-500 | GB
15 - 40 mm
30 - 50 mm
0
R
0
R
ASSEMBLY
PUB2/PUB2 DS 160-500 must only be installed vertically.
PUB2/PUB2 DS 160-500 is unscrewed from the pallet
and lifted into position. (use the lifting eye on the top of
PUB2 DS 500).
Position PUB2/PUB2 DS 160-500 on a firm base that
can take the weight, preferably on a concrete floor or
foundation. Use the product's adjustable feet to obtain
a horizontal and stable set-up.
The area where the PUB2/PUB2 DS 160-500 is located
must be frost-proof and equipped with a floor drain.
20-55 mm
30 - 50 mm
SUPPLIED COMPONENTS
Cover discs
Insulation plug
H o t w a te r 5 1 °C
H M flo w 4 9 (5 0 )
°C
-2
0
+ 2
0
1
R
H o t w a te r 5 1 °C
H M flo w 4 9 (5 0 )
°C
-2
0
+ 2
1
0
R
19
Advertenties
Inhoudsopgave
