Advertenties
Beschikbare talen
Beschikbare talen
In case of stubborn stains
Heavy contamination and stains (limescale stains,
pearl-like shiny spots) are best removed while
the hob is still warm. For this apply common
cleaning agents and cleaning methods. If this
does not work well enough, you can use a specific
cleaning product for cleaning vitro-ceramic glass
(for example, Vitroclen)
Boiled-over food should first be soaked with a wet cloth;
the contamination residues should then be removed
with a glass scraper that is specially designed for
ceramic hobs. After this, clean the hob as described
under "Cleaning glass hob".
Burnt-on sugar and melted plastics are best removed
immediately – while still hot – with a glass scraper. After
this, clean the hob as described under "Cleaning glass
hob". Grains of dirt/sand may fall on the cooking plate
while peeling potatoes or washing vegetables and may
cause scratches when moving the pans. Therefore,
ensure there are no grains left on the surface.
Discolouration of the hob does not have any influence
on the operation or strength of the vitro-ceramic. It
is not a form of damage to the hob, but it is a result
of residues that have not been removed and have
therefore burnt-in.
Shiny spots occur as a result of wear caused by the
base of the pans, in particular when using cooking
pans with an aluminium bottom or when using the
wrong cleaning agents. These can only be removed
with great difficulty using common cleaning agents.
If necessary, repeat the cleaning several times.
Due to the use of aggressive cleaning agents and
scratching caused by the pan bases, the glass surface is
rubbed off over the course of time, leaving dark stains.
Do not use the cooking plate as a table top or for
putting utensils on.
Always lift up the pans/pots and do not slide them
along the glass plate.
– 135 –
Advertenties
