Advertenties
Beschikbare talen
Beschikbare talen
5.3
Controlling the hob
5.3.1 Switch on and off
Switch on
Press
and continue to hold for 2 sec
The display will light up
Switch off
Press
Display goes out
Switching a cooking zone on and off:
Set up
Slide from left to right on the slider
(slider operation for power)
Switch off
Slide from right to left on the SLIDER
until the display shows
If there is no control input within 20 seconds, the
electronics will return to the wait position.
5.3.2 Pan detection
This hob is equipped with an interactive control system
that makes use of the hob even easier.
When you place a pan on the hob, it is automatically
detected. You will also see a
slider to use for the zone in question. The pan detection
ensures optimum safety.
The induction hob does not work:
− In case there is no pan on the cooking zone or if
the pan is unsuitable for induction, it is impossible
to put the power on and the
on the display.
− The operation is suspended when the pan is removed
from the cooking zone during cooking. The
will appear on the display. The symbol will disappear
when the pan is placed back onto the cooking surface.
The cooking will then continue at the same power
level as selected previously.
Switch off the cooking zone after use. The pan detection
will no longer be active.
Switching the hob on and off:
or
= "Hot".
0
H
to show you which
0
symbol will appear
– 119 –
Display
0‐9
0
H
symbol
Advertenties
