Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
FAULTS
Problems with the hob
The burner does not burn
evenly.
The burner goes out after
igniting.
Problems with the oven
The oven does not switch on.
The oven does not switch on
when connecting the unit to
the power supply.
The oven does not heat up.
Possible cause
Burner parts not placed
correctly.
Burner parts dirty/damp.
Wrong type of gas used.
Control knob not pressed in
long enough.
Possible cause
The oven is not set to manual
operation.
No time of day set.
No temperature set.
A visit by a service technician during the warranty period will be
charged if the appliance is not functioning because of improper use!
Solution
Assemble the burner parts
using the centring ridges.
Clean/dry the burner
components. Make sure that
the outflow holes are open.
Check whether the gas used
is suitable for the appliance.
Contact your installer if it is
not correct.
Keep the control knob pressed
in for at least 10 seconds.
Solution
Set the oven to 'manual
operation' (see page 10).
First set the time of the day
(see page 10). After that the
oven is ready for use.
Set the temperature using the
temperature knob (see page 10).
EN 23
Advertenties
Hoofdstukken
Inhoudsopgave
