Download Print deze pagina

Beko FSE1073 Gebruiksaanwijzing pagina 21

Verberg thumbnails Zie ook voor FSE1073:

Advertenties

Beschikbare talen

Beschikbare talen

6
Maintenance and cleaning
A
Never use gasoline, benzene or
similar substances for cleaning
purposes.
B
We recommend that you unplug the
appliance before cleaning.
B
Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish
for cleaning.
B
For non-No Frost products,
water drops and frosting up to a
fingerbreadth occur on the rear wall
of the Fridge compartment. Do not
clean it; never apply oil or similar
agents on it.
B
Only use slightly damp microfiber
cloths to clean the outer surface
of the product. Sponges and other
types of cleaning cloths may scratch
the surface.
C
Use lukewarm water to clean the
cabinet of your refrigerator and wipe
it dry.
C
Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe
it dry.
B
Make sure that no water enters the
lamp housing and other electrical
items.
B
If your refrigerator is not going to
be used for a long period of time,
unplug the power cable, remove all
food, clean it and leave the door ajar.
C
Check door seals regularly to ensure
they are clean and free from food
particles.
A
To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
A
Never use cleaning agents or water
that contain chlorine to clean the
outer surfaces and chromium coated
parts of the product. Chlorine causes
corrosion on such metal surfaces.
A
Do not use sharp, abrasive tools,
soap, household cleaning agents,
detergents, kerosene, fuel oil,
varnish etc. to prevent removal and
deformation of the prints on the
plastic part. Use lukewarm water
and a soft cloth for cleaning and
then wipe it dry.
Protection of plastic
surfaces
C
Do not put the liquid oils or oil-
cooked meals in your refrigerator
in unsealed containers as they
damage the plastic surfaces of your
refrigerator. In case of spilling or
smearing oil on the plastic surfaces,
clean and rinse the relevant part
of the surface at once with warm
water.
20
EN

Advertenties

loading