Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
supply must be performed by an authorized and locally recognized installer by
keeping the existing specifications.
Before connecting the appliance, check that the connection data on the data plate
(voltage and connected load) match the mains electricity supply.
1.3.1 Installation suggestions
• O pen the package. Before setting up the appliance, check it for any externally
visible damage due to transportation. If in any doubt, call for a specialist to
check it (from the authorized local dealer who sold the appliance).
• P lace the dishwasher at the installation area, close to the necessary water and
power supply (the ground should be sufficiently stable).
• T he appliance should be placed horizontally. Possible inclinations should be
corrected using a spirit level.
• F ollowing the successful installation, the dishwasher should be cleaned
thoroughly with a conventional detergent before it is put into operation.
1.4 Connection to the water supply
ATTENTION: The connection with the water supply should be made according to
the current safety standards.
The dishwasher may be connected to water supply with maximum inlet
temperature 55 o C/130 o F. In case you need connection with water supply of
high temperature please contact our Factory or our distributor or our local
dealer.
• T he water supply hose should have a flap valve (non-return valve) according to
DIN 1988.
• The water supply hose/pipe should be rinsed before the appliance's connection.
• T he water supply hose/pipe should have a minimum internal diameter of 16
mm and the connection with the hose should be 3/4 inch.
• A ll hose collars should be adjusted in a fixed position before the appliance is put
into operation.
ATTENTION: The water pressure must be between 2 and 5 bar.
www.info@saro.de
www.info@saro.de
24
Advertenties
Hoofdstukken
Inhoudsopgave
