Download Inhoudsopgave Inhoud Print deze pagina

Working Instructions; Adjusting The Spacer Bow (Flower Guard) (Fig. F5); Extending The Cutting Line; Setting The Line Length Manually - Parkside PRTA 20-Li D3 Vertaling Van De Oorspronkelijke Gebruiksaanwijzing

Grastrimmer met accu 20 v
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

Press the push button 
o
housing and tilt the telescopic shaft 
There are 5 positions available (see

"Working instructions"):

Cutting angle position
1
2
3
4
5
Function as a lawn trimmer:
o
Cutting angle position 1 to 4
(Rotary position 0°)
Function as a lawn edge trimmer:
o
Cutting angle position 5
(Rotary position 180°)
Adjusting the handle rod (Fig. F4)
m
CAUTION! Risk of injury!
Leave the handle rod 
u
position when using the product as
a lawn trimmer in the cutting angle
positions 1 to 4 . The protective cover 
must not be pointing away from the user .
NOTE
The handle rod can be turned by 180°
u
(see "Working instructions") .
Press the lock 
to release the lock and
[
7 ]
o
rotate the handle section
latches into the desired position .
Adjusting the spacer bow (flower
guard) (Fig. F5)
NOTE
The spacer bow 
u
assembly away from plants and trunks
not to be cut .
Fold down the distance spacer bow . If the
o
spacer bow is not required, fold it up into
the park position .
on the motor
11 ]
[
.
[
9 ]
15°
30°
45°
60°
75°
in the 0°
6 ]
[
12 ]
[
180°
until it
keeps the trimming
[
16 ]
˜ Extending the cutting line
(Fig. D)
NOTE
The product is equipped with a dual line
u
auto-feed mechanism .
The line extends automatically every time
u
the product is switched on . For proper
functioning of the automatic line extension
mechanism, the line spool 
stopped completely before you restart the
product .
If the lines are initially longer than the
u
cutting diameter, they are automatically
shortened to the right length by the line
cutter 
.
24 ]
[
Check the nylon line regularly for
u
damage and make sure the cutting line
still has the length specified by the line
cutter .
If no line ends are visible: Replace
o
the line spool 
(see "Cleaning and
14 ]
[
maintenance") .

Setting the line length manually:

o
Remove the battery 
Lightly pull on the thread ends and press the
locking button 
23 ]
[
until the thread ends protrude beyond the
line cutter .
must have
14 ]
[
from the product!
17 ]
[
repeatedly if required,
GB/IE/NI
19

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Hg10037

Inhoudsopgave