Read the user manual carefully . Be familiar
with the controls and the correct use of the
product .
The product must not be used at altitudes
higher than 2000 m .
Children and persons with limited
physical, sensory or mental capabilities or
inadequate experience and knowledge,
or persons who are not familiar with the
instructions, should never be allowed to use
the product! Local regulations may specify
an age limit for the user .
Never let children or persons who are not
familiar with the instructions mentioned use
the product .
Preparation
Before each use, carry out a visual
inspection on missing or wrongly mounted
protective devices or parts of the cutting
device .
Before commissioning and after any
impacts, check for signs of wear and
damages, and have any necessary repairs
performed .
Operation
m
WARNING!
Do not touch any moving dangerous
u
parts before the battery has been
removed and the moving dangerous
parts have come to a complete stop .
Wear safety goggles, stable shoes and
long trousers over the entire period of use
of the product .
The use of the product under bad weather
conditions, especially in case of lightning
risk, must be avoided .
Caution, risk of injury from cuts on hands
and feet .
Stop using the product when persons,
above all children, and house pets are in
the vicinity .
Use the machine only in daylight or with
good artificial lighting .
Always keep your hands and feet away
from the cutting equipment, above all when
you switch the motor on .
Never install metallic cutting elements .
Never use the product with damaged or
missing protective equipment .
Avoid an abnormal body posture . Ensure
secure footing at all times to maintain
balance when working on slopes .
Go slowly . Do not walk with the product in
your hand .
Always wear sturdy shoes and long trousers
during operation of the product .
In the case of an accident or malfunction
during operation, the product must be
switched off immediately . Injuries must be
properly treated or medical assistance
sought . Read the "Troubleshooting" section
to correct any malfunctions or contact our
Service Centre .
Do not use any accessories that are not
recommended by Parkside . This can result in
electric shock or fire .
Always disconnect the product from the
power supply (i .e . removable battery)
whenever the product is left unattended;
–
before clearing a blockage;
–
before checking, cleaning or working on
–
the product;
after striking a foreign object;
–
whenever the product starts vibrating
–
abnormally .
Always ensure that the ventilation openings
are kept free of foreign objects .
Maintenance and storage
Remove the removable battery before
carrying out maintenance or cleaning work .
Use only spare parts and accessories
supplied and recommended by the
manufacturer .
The product must be checked regularly and
maintained . Have the product repaired in a
licensed workshop .
When not in use, store the product out of
the reach of children .
GB/IE/NI
13