Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Cutting grass
I
Cut the grass by swaying the product
o
sideways to the right and left .
Cut slowly while the product is tilted
o
forwards by approx . 30° .
Cut tall grass by a series of levels from top
o
to bottom .
Lawn edge trimming
m
CAUTION! Risk of injury!
When working, make sure that the
u
protective cover
12 ]
[
cutting device .
To trim lawn edges, slowly move the
o
product along the lawn edges .
Setup for edge trimming:
o
Handle rod
: 180°
–
[
6 ]
(see "Adjusting the handle rod", Fig . F4)
Cutting angle position: 5
–
(see "Adjusting the cutting angle",
Fig . F3)
Spacer bow
–
16 ]
[
˜ Switching the product on/off
m
WARNING! Risk of injury!
After switching off the product, the
u
trimming assembly keeps revolving for
some time . Allow the trimming assembly
to come to a standstill . Keep hands and
feet away!
18 GB/IE/NI
protects you from the
in parking position
NOTE
Maintain a firm stand and hold the
u
product well with both hands and at
some distance away from your body .
Before turning on the product, check that
it will not touch any objects .
Remove grass cuttings regularly from the
u
spool cap
to make sure that cutting is
13 ]
[
not impaired .
Switching on: Use your thumb to actuate
o
the switch lock
3 ]
[
switch
. Release the switch lock .
[
2 ]
Switching off: Release the on/off switch .
o
There is no continuous operation mode .
˜ Adjusting the product
Adjusting the auxiliary handle (Fig. F1)
The auxiliary handle
o
various positions . Adjust the handle so that
the spool cap
[
13 ]
as you work (see picture below "Cutting
grass") .
Loosen the handle screw
o
the auxiliary handle to your favourite
position . Tighten the handle screw . The
latching steps integrated into the holder
prevent the handle from changing position
unintentionally .
Adjusting the height (Fig. F2)
NOTE
The telescopic shaft
u
adjust the product to your personal size .
Loosen the threaded bush
o
telescopic shaft to the correct length and
tighten the threaded bush .
Adjusting the cutting angle (Fig. F3)
NOTE
Changing the cutting angle lets you trim
u
grass at places that a difficult to reach,
e .g . under benches or wall offsets .
, then press the on/off
can be set to
5 ]
[
is tilted slightly forward
and move
27 ]
[
allows you to
9 ]
[
. Adjust the
8 ]
[
Advertenties
Hoofdstukken
Inhoudsopgave
