Accessories
To operate this product safely and correctly,
always wear suitable personal protective
equipment .
This includes:
Safety goggles
–
–
Hearing protection
Protective gloves
–
Protective footwear
–
–
Protective clothing
Mounting the product
m
WARNING! Risk of injury!
Wear safety gloves!
Wear ear protection!
Wear eye protection!
Wear protective, slip-resistant
footwear!
m
WARNING! Risk of injury!
Remove the battery
u
before assembly . Insert the battery
only once the product is completely
assembled .
1 . Mounting the distance roller
(Fig. B): Push the distance roller
through the holes on the motor head
far as possible . The distance roller points
upwards .
2 . Mounting the protective cover
(Fig. C): Place the protective cover
the motor head .
3 . Tighten the protective cover with 4 Phillips
screws
.
19 ]
[
16 GB/IE/NI
from the product
17 ]
[
15 ]
[
as
10 ]
[
on
12 ]
[
4 . Mounting the additional handle
(Fig. E): Unscrew and remove the pre-
assembled handle screw
handle
.
[
5 ]
5 . Slide the auxiliary handle
handle holder
[
26 ]
spare spool
points upwards .
4 ]
[
6 . Insert the handle screw
through hole on the handle holder .
7 . Screw on the auxiliary handle with the
handle screw (Fig . E) .
Inserting/removing the
battery
Removing the battery: Press the
o
release button
[
17a ]
battery
.
[
17 ]
Inserting the battery: Place the
o
battery on the guide track and push it into
the product . The battery audibly snaps in .
Charging the battery
NOTE
Allow a hot battery
u
before charging .
Only charge the battery if the red LED on
u
the charge status indicator
1 . Remove the battery from the product if
required .
2 . Insert the battery in the charging
compartment of the battery charger
3 . Connect the charger to a mains outlet .
4 . Once the battery is fully recharged, unplug
the charger from the mains outlet .
5 . Remove the battery from the charger .
of the auxiliary
27 ]
[
over the
[
5 ]
. The receptor for the
through the
[
27 ]
and pull out the
to cool down
[
17 ]
lights up .
17b ]
[
.
18 ]
[