Advertenties
Beschikbare talen
Beschikbare talen
Before use
NOTE
►
The compressed air tool may only be operated using cleaned,
oil-atomised compressed air and the maximum operating pres-
sure of 6.3 bar must not be exceeded on the appliance. The
compressor must be fitted with a pressure reducer to regulate
the working pressure.
►
Wind the supplied Teflon tape
tors.
Fitting the connector nipple
♦
Wrap the threads on the connector nipple
Teflon tape
♦
Screw the connector nipple
Lubrication
NOTE
►
Regular lubrication is particularly important to avoid friction
and corrosion damage. We recommend using a suitable
special oil for compressed air tools (e.g. Liqui Moly compressor
oil).
–
Lubrication with mist oiler
A mist oiler (not supplied) continuously and optimally
lubricates the appliance as a preparation stage after the
pressure reducer. A mist oiler gives off fine drops of oil into
the air flow and thus guarantees regular lubrication.
–
Manual lubrication
If you do not have a mist oiler, lubricate the tool before
every use or longer work sessions. Add 3–5 drops of
pneumatic oil into the connector nipple
PDSS 16 A1
.
around all threaded connec-
with the supplied
into the air inlet
GB │ IE │ NI
.
.
│
17
■
Advertenties
