Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6. Pull the outer layer of the Longopac cassette down.
7. Close the bottom of the Longopac with a cable tie.
To discard a full Longopac bag and
prepare a new Longopac bag
WARNING:
caution, a full Longopac bag can be heavy.
Make sure that the cable ties are closed
correctly before you lift the Longopac bag.
14
Lift the Longopac bag with
1. Pull out the Longopac bag (A) and attach a cable tie
(B) to close the new Longopac bag.
B
2. Shake down the dust in the used Longopac bag.
3. Attach a cable tie 10 cm/3.9 in. below the first cable
tie to close the used Longopac bag. Cut off the
Longopac bag between the cable ties.
4. If the remaining part of the Longopac bag cassette
is too small to prepare a new Longopac bag, install
a new Longopac bag cassette. Refer to
new Longopac bag cassette on page 13 .
5. Obey local regulations for disposal of the full
Longopac bag.
To do after completed work
1. Do the filter purge procedure. Refer to
dust particles from the prefilter during operation on
page 12 .
A
To install a
To remove
1587 - 010 - 13.12.2022
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
