Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Care and cleaning
With attentive care and cleaning, your hob and oven will retain
its looks and remain in good working order for a long time. We
will explain here how you should care for and clean them
correctly.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect operation. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.
Cleaning agents
Damage to the various different surfaces caused by using the
wrong cleaning agent can be avoided by observing the
following instructions.
When cleaning the hob do not use
undiluted washing-up liquid or dishwasher detergent,
■
scouring pads,
■
abrasive cleaning agents such as oven cleaner or stain
■
remover,
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
When cleaning the oven do not use
sharp or abrasive cleaning agents,
■
cleaning agent with a high alcohol content,
■
scouring pads,
■
high-pressure cleaners or steam jets.
■
Do not clean individual parts in the dishwasher.
■
Wash new sponges thoroughly before first use.
Zone
Cleaning agent
Stainless steel sur-
Hot soapy water:
faces*
Clean with a dish cloth and dry with a
soft cloth. On stainless steel surfaces,
(depending on
always wipe parallel to the natural grain.
appliance model)
Otherwise, you may scratch the surface.
Remove patches and splashes of limes-
cale, grease, starch and albumin (e.g.
egg white) immediately. Corrosion can
form under such patches and splashes.
Special care products suitable for hot
stainless steel surfaces are available
from our after-sales service and from
specialist retailers. Apply a thin layer of
care product with a soft cloth.
Enamel, painted,
Hot soapy water:
plastic and screen-
Clean with a dish cloth and dry with a
printed surfaces*
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
(depending on
appliance model)
Control panel
Hot soapy water:
Clean with a dish cloth and dry with a
soft cloth. Do not use glass cleaner or
glass scrapers for cleaning.
* Optional (available for some appliances, depending on the
appliance model)
18
Zone
Cleaning agent
Upper glass cover*
Glass cleaner:
Clean with a soft cloth.
(depending on
You can remove the upper glass cover
appliance model)
for cleaning. To find out how to do this,
please refer to the section Upper glass
cover.
Rotary knobs
Hot soapy water:
Do not remove.
Clean with a dish cloth and dry with a
soft cloth.
Hob surround
Hot soapy water:
Do not clean with a glass scraper, lemon
juice or vinegar.
Gas hob and pan
Hot soapy water.
supports*
Use very little water. Water must not be
allowed to enter the appliance through
(depending on
the base of the burners.
appliance model)
Clean off boiled-over liquids and spilt
food immediately.
You can remove the pan supports.
Cast iron pan supports*:
Do not clean in the dishwasher.
Gas burners*
Remove the burner head and cap and
clean with hot soapy water.
(depending on
Do not clean in the dishwasher.
appliance model)
The gas outlet openings must remain
unobstructed at all times.
Ignition plugs: Small, soft brush.
The gas burners only work properly when
the ignition plugs are dry. Dry all parts
thoroughly. Ensure that they are refitted
correctly.
The burner caps are coated in black
enamel. The colour may change over
time. This does not impair their perfor-
mance.
Electric hotplate*
Abrasive materials or sponges:
Briefly heat up the hotplate afterwards,
(depending on
so that it dries. Hotplates can rust over
appliance model)
time if they remain wet. Apply care prod-
uct to finish.
Clean off boiled-over liquids and spilt
food immediately.
Hotplate ring*
Remove yellow to blue iridescent discol-
ouration from the hotplate ring with a
(depending on
steel care product.
appliance model)
Do not use any abrasive materials that
may scratch surfaces.
Ceramic hob*
Care: Protective/care products for
ceramics
(depending on
Cleaning: Cleaning agents suitable for
appliance model)
ceramics.
Follow the cleaning instructions on the
packaging.
:
Glass scraper for stubborn dirt:
Remove the protective cover and clean
using the blade only. Caution: The blade
is very sharp. Risk of injury.
Cover the blade again after cleaning.
Replace damaged blades immediately.
* Optional (available for some appliances, depending on the
appliance model)
Advertenties
Hoofdstukken
Inhoudsopgave
