Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Making settings on the hob
Your hob is equipped with four gas burners. The following
information explains how to light the gas burners and set the
size of flame.
Advance cleaning of burner cup and cap
Clean the burner cap (1) and cup (2) with water and washing-
up liquid. Dry the individual parts carefully.
Place the burner cup and cap back on the burner shell (5).
Ensure that the igniter (3) and flame safety pin (4) are not
damaged.
The nozzle (6) must be dry and clean. Always position the
burner cap exactly over the burner cup.
Igniting the gas burners
Always position the burner cap exactly onto the burner cup. The
openings in the burner cup must remain unobstructed at all
times. All parts must be dry.
Open the upper cooker cover. The upper cover must remain
1.
open whilst the cooker is in operation.
Turn the control for the required hotplate anti-clockwise to the
2.
ignition position
8
. This starts the ignition process.
Press and hold the hotplate control for 1-3 seconds. Gas
3.
begins to flow out and the gas burner ignites.
Example
Melting
Warming
Heating and keeping
warm
Steaming*
Braising*
Boiling*
Roasting
* If you are using a pan with a lid, turn the flame down as soon as it reaches boiling point.
** Optional. Available for some appliances, depending on the appliance model (for frying on the wok burner, we recommend that
you use a wok)
Food
Chocolate, butter, margarine
Stock, tinned vegetables
Soups
Fish
Potatoes and other vegetables,
meat
Rice, vegetables, meat dishes
(with sauces)
Pancakes, potatoes, schnitzel,
fish fingers
The safety pilot is activated. If the gas flame goes out, the gas
supply is automatically cut off by the safety pilot.
Set the required flame size. Between the Off
4.
setting, the flame is not stable. Therefore, always choose a
—
setting between the large flame
If the flame goes out again, repeat the process from step 2.
5.
To finish cooking, turn the hotplate control clockwise to the
6.
Off
þ
position.
The hotplate control should not be turned to the ignition
position for longer than 15 seconds. If the burner does not light
within 15 seconds, wait at least one minute. Then repeat the
ignition process.
:
Caution!
If, after switching the cooker off, you turn the burner control
while the cooker is still hot, gas will escape. If you do not turn
the hotplate control to the ignition position
seconds, the gas supply will be cut off.
The gas burner does not ignite
If there is a power cut or if the ignition plugs are damp, you can
light the gas burners with a gas lighter or a match.
Table – Cooking
Select the right pan size for each hotplate. The diameter of the
pot or pan base should be the same as that of the hotplate.
Cooking times may vary depending on the type of food, its
weight and quality. You yourself can best judge the optimal
cooking time.
Use as little water as possible when cooking, so that the food
retains its vitamins and minerals. Select short cooking times so
that the vegetables remain firm and full of nutrients.
Hotplate
Economy burner
Standard burner
Electric hotplate**
Economy burner
Electric hotplate**
Standard burner
Electric hotplate**
Standard burner
Electric hotplate**
Standard burner
Electric hotplate**
High-output burner**
Wok burner**
setting and the
þ
and small flame
—
within 60
8
Heat setting
Small flame
Small flame
1-2
Small flame
1-2
Between large and small flame
3-4
Between large and small flame
3-4
High flame
5-6
Between large and small flame
.
˜
13
Advertenties
Hoofdstukken
Inhoudsopgave
