Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
18
www.aeg.com
• The stainless steel edge of the plate
can change the colour as a result of
high temperature.
• Wash stainless steel parts with water,
and then dry them with a soft cloth.
6.2 Cleaning the electric
hotplate
1. Use the cleaning powder or the
cleaning pad.
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem
You cannot activate or oper-
ate the hob.
7.2 If you cannot find a
solution...
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre. Give the
data from the rating plate. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or
2. Clean the hob with a moist cloth and
some detergent.
3. Heat the hotplate to a low
temperature and let it dry.
4. To keep the hotplates in good
shape, rub in a sewing machine oil
regularly. Polish off the oil with
absorbent paper.
Possible cause
The hob is not connected to
an electrical supply or it is
connected incorrectly.
The fuse is released.
dealer will not be free of charge, also
during the warranty period. The
instructions about the Service Centre and
conditions of guarantee are in the
guarantee booklet.
Remedy
Check if the hob is correctly
connected to the electrical
supply. Refer to the connec-
tion diagram.
Make sure that the fuse is
the cause of the malfunction.
If the fuse releases again
and again, contact a quali-
fied electrician.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
