Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Sewing basics
Monogramming and embroidering with embroidery hoop*
* The embroidery hoop is not supplied with
the machine.
100
GB / IE / NI
Stitch
Stitch width Stitch length
B
1~5
Attach the embroidery and darning plate
1. Remove the presser foot and the presser
foot holder.
2. Attach the embroidery and darning plate
(p).
3. Lower the two-step presser foot lifter (18)
before starting to sew.
4. Adjust the stitch width according to the
size of lettering or design.
Preparation for monogramming and
embroidering*
1. Draw the desired lettering or design on
the rear side of the fabric.
2. Stretch the fabric between the
embroidery hoop as firmly as possible.
3. Place the fabric under the needle. Lower
the two-step presser foot lifter (18).
4. Turn the hand wheel (21) towards you to
bring up the lower thread through the
fabric. Sew a few securing stitches at the
starting point.
5. Hold the hoop with thumb and
forefingers of both hands.
6. Coordinate the sewing speed and the
movement of hoop.
0
Advertenties
Hoofdstukken
Inhoudsopgave
