NORMBAU Cavere Care Montage- En Gebruiksaanwijzing pagina 11
Verberg thumbnails
Zie ook voor Cavere Care:
- Montage- en gebruiksaanwijzing (4 pagina's) ,
- Montage- en gebruiksaanwijzing (16 pagina's) ,
- Montage- en gebruiksaanwijzing (20 pagina's)
Advertenties
Beschikbare talen
Beschikbare talen
Montagehinweise / Mounting information / Consigne de montage / Montagetip
loading permitted and the instructions for mounting! Following installation, the
instructions must be made available to the user.
In case of questions, mor information, uncertainties or if damage occurs, contact the
NORMBAU support service +49 (0) 7843 704 0 or visit us at www.normbau.de.
Load
Max. loading permitted of listed products: 100kg
With max. length and max. loading permitted, the max. force per fastening is 3kN.
Maintenance
NORMBAU products are not maintenance-free! The products are to be tested
monthly by qualified specialists for proper function. In the event of defects (e.g.
insufficient braking force), the assembly instructions must be observed.
Maintenance and cleaning
Risk of injury
Improper cleaning can cause damage to the surface and lead to injuries.
Cavere Care
Powder-coated products from NORMBAU have a smooth, easy-to-clean surface. In
order to maintain the decorative design and color of the coating of our products for
years, cleaning and care must be carried out professionally. Slightly adhering dirt
can be removed with a sponge and water to which a neutral cleaning agent (e.g.
dishwashing liquid) is added. Immediately after each cleaning process, rinse with
pure, cold water. A chamois or microfiber cloth removes the remaining wiping marks
or drops of water. Abrasive or strong acidic/alkaline cleaning agents should never
be used. With metallic coatings, heavy soiling should be cleaned as soon as
possible, since dried and old dirt can often only be removed abrasively and with the
risk of damage to the powder coating or a change in color. Common wiping
disinfectants can be used.
Cavere Care Chrome
Abrasive sponges and scouring agents should not be used to clean our Cavere
Chrome products. We also advise against the use of cleaners containing solvent or
acid, limescale removers, vinegar and cleaning agents containing acetic acid.
The chrome surface can be cleaned using a little soap on a damp cloth. Limescale
stains can be avoided by drying the tap after every use. If limescale deposits still
build up, you can remove these using an environmentally friendly cleaning agent.
The appropriate cleaning agent should only be left on for a short time before being
rinsed thoroughly with water. In areas with hard water, it may be necessary to clean
2024-04-03 / 8214 316 / K
|
11 von 32
NORMBAU
Advertenties
