Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Can I also operate an inverter in the
vehicle on my lithium batteries?
Can I expand lithium batteries
with a parallel connection of other
batteries?
Further questions?
6.2. Possible errors and their correction
I can't find my battery with
my APP.
The battery switches off during
operation, the voltage is
0V.
With my new battery, cycles
are already displayed in the
APP.
The states of charge of my
two identical batteries connected
in parallel are different.
Actually, they should be
exactly the same.
42
Lithium batteries are particularly suitable for inverter operation,
as the voltage level remains constantly high during
discharge and thus the inverter does not switch off.
However, the maximum continuous discharge current of
the battery must not be exceeded.
Yes, as long as the manufacturer, type and capacity are
the same. Also, the age should not be too far apart, as
well as the voltages of the battery must be aligned.
Please contact your seller or ask us by email: info@powerboozt.de
-
Is the battery charged? Please check with a voltmeter, voltage
should be above 11V.
-
Is location sharing activated in your smartphone?
-
Is the Bluetooth function of your mobile device activated?
-
Is the battery possibly already connected to another device via
Bluetooth? Only 1 connection is possible.
-
Is your smartphone already connected to another Bluetoot
device via Bluetooth? Only 1 connection is possible.
There is an error, the BMS has disconnected the battery due to
one of the causes mentioned in 2.3. Please eliminate the cause.
It is normal that up to 3 cycles are already displayed because the
battery is checked at the manufacturer's and at the reseller's
before sale.
This is normal with new batteries or after some time of use.
With new batteries, this should have equalised after a few cycles.
With older batteries, please fully charge them individually
and connect them in parallel again with a maximum deviation
of 50mV from each other. Please also check the wiring, always
connect the inlets and outlets diagonally so that the batteries
are loaded evenly.
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
