Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Husqvarna Handleidingen
  4. Zagen
  5. FS7000 D
  6. Gebruiksaanwijzing

To Do A Check Of The Water Supply To The Cutting Blade (Fs7000 D); To Do A Check Of The Water Supply To The Cutting Blade (Fs7000 Dl) - Husqvarna FS7000 D Gebruiksaanwijzing

Verberg thumbnails Zie ook voor FS7000 D:
Inhoudsopgave

Advertenties

Beschikbare talen

Beschikbare talen

1. Turn the water drain valve on the gearbox
counterclockwise to open.
2. Turn the water drain valve on the gearbox clockwise
to close.
To do a check of the water supply to
the cutting blade (FS7000 D)
1. Loosen the front bolt on the blade guard and lift the
blade guard latch (A).
C
2. Lift the blade guard front (B) and lock the blade
guard in upright position with a wire and carabiner
(C).
3. Open the water valve.
1223 - 002 - 09.07.2019
A
4. Make sure that the jets of water go straight out from
the holes and onto each side of the cutting blade.
5. Make sure that there are no leakages in the water
pipes.
B
6. Replace the water pipes if they are damaged.
To do a check of the water supply to
the cutting blade (FS7000 DL)
1. Lift the blade guard front.
2. Lock the blade guard in upright position with a spring
hook.
31

Advertenties

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Husqvarna FS7000 D

Gerelateerde Producten voor Husqvarna FS7000 D

Deze handleiding is ook geschikt voor:

Fs7000 dl

Inhoudsopgave