Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Preparing the Device for Use
PLEASE NOTE!
■
Only connect the device to a plug socket that is properly installed and matches the
technical data of the device. The plug socket must also be readily accessible after
connection so that the connection to the mains can quickly be isolated.
■
Lay the connecting cable in such a way that it does not become squashed or bent and
does not come into contact with hot surfaces.
1. Place the device on a dry, even and fi rm surface. If the device is used on a carpet,
make sure that the ventilation openings on the bottom of the device remain clear.
Protect sensitive fl oor coverings on which the device is placed with a mat if
necessary.
2 m
1 - 1,6 m
1 m
2. First connect the connecting cable to the socket of the device and then to a properly
installed, easily accessible plug socket.
Attaching Expander Bands
2. Pull the loops of the expander bands through the eyelets, push through the expander
bands and pull them tight
3. Then place the device back on its feet.
20
Depending on your body size, leave plenty of
space on all sides of the training device (at
least 1 metre to the sides, 2 metres above) so
that you have enough room to move about in
during a workout. Furthermore, the free area in
the direction from which you access the training
device must be at least 0.6 m greater than the
exercise area. The free area must include the
space required for an emergency dismount. If
training devices are set up in the immediate
1 - 1,6 m
vicinity of one another, they can share one free
area.
1 - 1,6 m
1. Turn over the device so that the bottom is pointing up-
wards. Next to the feet of the device there are two plates
with eyelets.
Advertenties
Hoofdstukken
Inhoudsopgave
