Troubleshooting - AEG CIB6646ABM Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor CIB6646ABM:
- Gebruiksaanwijzing (48 pagina's) ,
- Gebruiksaanwijzing (44 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
12.9 The drawer
WARNING!
Do not put food inside the drawer.
WARNING!
Do not keep flammable items such as
cleaning materials, plastic bags, oven
gloves, paper, cleaning products,
aerosols, plastic items) in the drawer.
When you use the oven, the drawer can
become hot. There is a risk of fire.
13. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
13.1 What to do if...
Problem
You cannot activate the appliance.
You cannot activate the appliance.
You cannot activate or operate the
hob.
You cannot activate or operate the
hob.
An acoustic signal sounds and the
hob deactivates.
An acoustic signal sounds when the
hob is deactivated.
The hob deactivates.
Residual heat indicator does not
come on.
Automatic Heat Up function does
not operate.
Automatic Heat Up function does
not operate.
The drawer below the oven can be removed
for cleaning.
Removing the drawer:
1. Pull the drawer out until it stops.
2. Lift the drawer slightly, so that can be
To install the drawer, follow the procedure in
reverse.
Possible cause
The appliance is not connected to
an electrical supply or it is connec‐
ted incorrectly.
The fuse is blown.
You touched 2 or more sensor fields
at the same time.
There is water or fat stains on the
control panel.
You put something on one or more
sensor fields.
You put something on the sensor
field
.
The zone is not hot because it oper‐
ated only for a short time.
The zone is hot.
The highest heat setting is set.
lifted upwards at an angle of the drawer
guides.
Remedy
Check if the appliance is correctly
connected to the electrical supply.
Make sure that the fuse is the cause
of the malfunction. If the fuse is
blown again and again, contact a
qualified electrician.
Touch only one sensor field.
Clean the control panel.
Remove the object from the sensor
fields.
Remove the object from the sensor
field.
If the zone operated sufficiently long
to be hot, speak to an Authorised
Service Centre.
Let the zone become sufficiently
cool.
The highest heat setting has the
same power as the function.
ENGLISH
61
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
