The Heat Setting; Using The Cooking Zones - AEG CIB6646ABM Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor CIB6646ABM:
- Gebruiksaanwijzing (48 pagina's) ,
- Gebruiksaanwijzing (44 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• you use incorrect cookware. The symbol
comes on and the cooking zone
deactivates automatically after 2 minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting and
the time after which the hob deactivates:
Heat setting
, 1 - 3
4 - 7
8 - 9
10 - 14
6.6 The heat setting
To set or change the heat setting:
Touch the control bar at the correct heat
setting or move your finger along the control
bar until you reach the correct heat setting.
6.7 Using the cooking zones
Put the cookware on the cross / square which
is on the surface that you cook. Cover the
cross / square fully. Induction cooking zones
adapt to the dimension of the bottom of the
cookware automatically. You can cook with
the large cookware on two cooking zones at
the same time.
For optimal heat transfer use cookware
with bottom diameter similar to the size of
the cooking zone (i.e. the maximum
cookware diameter value in "Technical
data" > "Cooking zones specification").
Make sure that the cookware is suitable
for induction hobs. For more information
on cookware types refer to "Hints and
tips".
46
ENGLISH
The hob deactivates
after
6 hours
5 hours
4 hours
1.5 hour
6.8 Automatic heat up
Use the function to get a desired heat setting
in a shorter time. When the function is on, the
cooking zone operates at the highest heat
setting in the beginning and then continues to
operate at the desired heat setting.
To activate the function the cooking zone
must be cold.
To activate the function for a cooking
zone: touch
(
touch a desired heat setting. After 3 seconds
comes on.
To deactivate the function: change the heat
setting.
6.9 PowerBoost
This function makes more power available to
the induction cooking zones. The function can
be activated for the induction cooking zone
only for a limited period of time. After this time
the induction cooking zone automatically sets
back to the highest heat setting.
To activate the function for a cooking
zone: touch
.
To deactivate the function: change the heat
setting.
6.10 Timer
Count down timer
You can use this function to set how long the
cooking zone should operate for a single
cooking session.
First set the heat setting for the cooking zone
then set the function.
To set the cooking zone: touch
and again until the indicator of a necessary
cooking zone comes on.
To activate the function: touch
timer to set the time (00 - 99 minutes). When
the indicator of the cooking zone starts to
flash slowly the time counts down.
To see the remaining time: set the cooking
zone with
. The indicator of the cooking
comes on). Immediately
comes on.
again
of the
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
