Before First Use; Initial Preheating And Cleaning; Accessories; Changing The Time - AEG CIB6646ABM Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor CIB6646ABM:
- Gebruiksaanwijzing (48 pagina's) ,
- Gebruiksaanwijzing (44 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4.2 Hob overview
1
2
1
Induction cooking zone
1
5. BEFORE FIRST USE
WARNING!
Refer to Safety chapters.
5.1 Initial preheating and cleaning
Preheat the empty appliance before the first
use and contact with food. The appliance can
emit unpleasant smell and smoke. Ventilate
the room during preheating.
1. Remove all accessories and removable
shelf supports from the appliance.
2. Set the function
temperature. Let the appliance operate
for 1 h.
3. Set the function
temperature. Let the appliance operate
for 15 min.
4. Set the function
temperature. Let the appliance operate
for 15 min.
5. Turn off the appliance and wait until it is
cold.
6. Clean the appliance and the accessories
only with a microfibre cloth, warm water
and a mild detergent.
7. Put the accessories and removable shelf
supports back to their initial position.
1
1
. Set the maximum
. Set the maximum
. Set the maximum
Control Panel
2
4.3 Accessories
• Wire shelf
For cookware, cake tins, roasts.
• Baking tray
For cakes and biscuits.
• Grill- / Roasting pan
To bake and roast or as pan to collect fat.
• Telescopic runners
For shelves and trays.
• Storage drawer
The storage drawer is below the oven
cavity.
5.2 Using the sensor fields
To activate the function press and hold the
selected symbol on the display for at least 1
second.
5.3 Setting the time
You must set the time before you operate the
oven.
The
flashes when you connect the
appliance to the electrical supply, when there
was a power cut or when the timer is not set.
Press the
or
to set the correct time.
After approximately five seconds, the flashing
stops and the display shows the time of day
you set.
5.4 Changing the time
You cannot change the time of day if any
of the functions operates.
Press
again and again until the indicator
for the Time of Day function flashes.
To set a new time, refer to "Setting the time".
ENGLISH
43
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
