OPERATION
Oven functions and operation.
Oven with conventional heating
(including top + bottom heaters)
The oven can be warmed up using the bottom
and top heaters, as well as the grill. Operation
of the oven is controlled by the oven function
knob – to set a required function you should
turn the knob to the selected position,
as well as the temperature regulator knob – to
set a required function you should turn the
knob to the selected position.
The oven can be switched off by setting both
of these knobs to the position ""/"0".
Caution!
When selecting any heating func-
tion (switching a heater on etc.) the
oven will only be switched on after
the temperature has ben set by the
temperature regulator knob.
Possible settings of the oven function
knob
0
0
Switching on the oven is indicated by two
signal lights, R, L, turning on. The R light
turned on means the oven is working. If the L
light goes out, it means the oven has reached
the set temperature. If a recipe recommends
placing dishes in a warmed-up oven, this
should be not done before the L light goes out
for the first time. When baking, the Llight will
temporarily come on and go out (to maintain
the temperature inside the oven). The R sig-
nal light may also turn on at the knob position
of "oven chamber lighting".
15
Oven is off
Top heater on
Setting the knob to this postion allows
the oven to be heated only with the
top heater switched on, e.g. use for
final baking from above.
Bottom heater on
When the knob is set to this position
the oven is heated using only the bot-
tom heater. Use for e.g. final baking
from the bottom.
Bottom and top heaters on
Setting the knob to this position
allows the oven to be heated con-
ventionally.
Separate oven lighting
By setting the knob to this posi-
tion the lighting inside the oven is
switched on, e.g. use when washing
the oven chamber.
ECO Heating
This is an optimised heating function
designed to save energy when pre-
paring food. At this knob position, the
oven lighting is off.