Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
It will be easier to clean if you do not allow the remaining scraps of food to dry.
1. Remove the cone (2) and rinse it under running water.
2. Rinse the juice container (5) with water, that can be collected in a glass placed on
the glass-holder (8).
Model n°70: Remove the juice container (5) by hand.
3. Finish off cleaning the container with a sponge.
4. Clean the pressing cup (3) with a sponge.
Model n°70: removing the pressing cup by rotating ¼ turn
5. Remove the glass-holder (8), the grid (10) and rinse under running water.
6. Model n°10: When more thorough cleaning is required, the pressing cup (3) must
be removed. To do this, unscrew it by turning it anti-clockwise (Fig. B and Fig. C).
The base and the motor unit trim should be cleaned with a soft, damp sponge and then
dried.
MAINTENANCE
!
Spare parts:
!
This machine requires no specific maintenance. The bearings are lubricated for life.
If any intervention is necessary to replace parts subject to wear, such as the cone, the
pressing cup electrical or other components, please refer to the parts lists (see the
exploded view at the end of this manual).
For all spare part orders (see references in the exploded view at the end of the manual),
state:
the type,
the machine serial number and
the electrical specifications
recorded under the machine.
408006-013-070-106-170 en ma 2010.12
Prior to carrying out any intervention on the appliance, it must be
disconnected from the mains without fail.
IMPORTANT: Use of spare parts other than certified original SANTOS
parts is prohibited
7/13
Advertenties
Hoofdstukken
Inhoudsopgave
