Technical features
Operating temperature
Climate Class
Power
Voltage / Frequency
External dimensions
Internal dimensions
Max. shelf load (net)
Values specified above are given according to standard values and can vary by optional features.
Type label is located in the refrigerant part of the cabinet.
Please see the back page of the guide for the type label sample.
Class
0
1
2
3
4
5
6
7
8
4. ASSEMBLING SINGLE DOOR COOLER / THE INITIAL START-UP
Air circulation at the rear is required for the coolers operate efficiently. Move the cooler backwards to place it
properly. Allow minimum 10cm of space from the sides and the rear in order to ensure proper air circulation.
Leva the top of the cooler free. For models S88SC and S56SC, allow minimum 10cm of space from the rear and
minimum 30cm of space from the sides for proper air circulation. Your cooler is now ready to plug in.
5. OPERATION
Avoid blocking air circulation inside the cooler, when loading the cooler with products. Otherwise undesired and
extensive temperature variances may occur between the top and bottom compartments of the cooler.
Control panel:
Control panel consists of the following components depending on the model:
Green light (optional):
It is lit so long as the cooler is connected to the electric supply.
Thermostat setting knob (optional):
It is used to regulate the internal temperature of your cooler.
Thermostat adjustment is the most optimum adjustment in products with mechanical thermostat in factory
defaults. It is recommended not to be replaced as long as it is not troubled with the internal product temperature.
If you think that the product is not in desired temperature range you can make thermostat adjustment.
°C
W
V/Hz
WxDxH (mm)
WxDxH (mm)
Kg
Climate Classes
Temperature °C
20
16
22
25
30
27
40
35
23,9
www.combisteel.com
7464.0085 – 7464.0090 – 7464.0095
0/+10
Please see the name plate
595x650x2000
490x447x1570
41
Relative humidity %
50
80
65
60
55
70
40
75
55
Dew point °C
9,3
12,6
15,2
16,7
20
21,1
23,9
30
14,3
6