Advertenties
Beschikbare talen
Beschikbare talen
Operating tips
Attention!
Before any work on the tool, disconnect the plug from the
mains!
Clutch
The screw can be placed on the still standing bit while the machine is
running. The clutch engages only after applying pressure while screwing.
When the depth stop comes to rest on the surface, the clutch is
disengaged. The bit again comes to a stop.
Screwing
Make sure that the bit and screw correspond in size and shape. Optimal
screwing is achieved when the screwing device is fixed securely in the
screw head.
Selecting the direction of rotation
This tool is equipped with reversing button (2) to change the direction of
rotation.
Fig.2 -
- Clockwise rotation - For drilling and fixing screws
Fig.3 -
- Anticlockwise rotation - For loosening and removing screws
When the on/off switch (3) is pressed the reversing button (2) can`t be
actuated.
WARNING:
Prior to operation always check the direction of rotation. Shift the reversing
button only when the spindle has come to a complete stop. Reversing prior
to final spindle halt may damage the power tool.
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only be appropriately qualified and experienced
personnel.
After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance.
observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.
However, the following points always have to be
14
Advertenties
