Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
New recirculation filters
Visit the Novy website to purchase new recirculation
filters.
Installing new recirculation filters
Remove the 2 new recirculation filters from the
packaging. The recirculation filters should be installed
on each side of the motor. Position the recirculation
filter opening over the shaft
that protrudes from the centre of the motor. Rotate
each filter a quarter turn to secure to the motor.
Reset recirculation filter cleaning indication
When the fat filter and the recirculation filters are
replaced after cleaning, simply keep the T4 button
pressed to reset the timer. If you do not do this, the
indicator lamps will keep flashing until the hood is
switched off again.
4.3 Maintenance of the hood
Please allow the lights to cool down sufficiently before
cleaning the hood. Use a soft, wet cloth and a mild
detergent to clean the hood. Never use aggressive,
abrasive detergents or sponges. Bleach will damage
stainless steel. The stainless steel surfaces can be
treated with
Novy Inoxcleaner (906.060) after cleaning.
4.4 Technical problem
In case of technical problems please contact Novy
Service Department:
For Belgium:
Tel.: 056/36.51.02
For France:
Tel.: 03.20.94.06.62
For Germany:
Tel.: 0511.54.20.771
For all other countries: your local installor or Novy
Belgium:
+32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engraved
plaque behind the filter.
You can make a note of the number here:
.......................................................................................
Electrical scheme: p. 14
Dimensions: p. 16
Characteristics of the product on condition of changes
or printing errors, December 2018
EN 13
Advertenties
Inhoudsopgave
