Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
STANDARD SIDEGUARD,
SIDE GUARD, FLIP-UP, REMOVABLE WITH SHORT OR
LONG ARMRESTS, HEIGHT-
ADJUSTABLE
WITH SHORT OR LONG
ARMRESTS
The sideguard with rounded off
front edges will allow you to get up
close to a table. To flip the armrest
up, push the lever (1), so that the
sideguard is released (Fig. 6.36
and 6.37).
The height of the armrest (2) can
be adjusted by fitting the
spacer bracket in various
positions. To do this release the
screws, move the spacer bracket
and re-tighten the screws. The
length of the armrest can be
adjusted by releasing the screws
(3), then move the armrest to the
desired position and re-tighten the
screws (Fig. 6.37).
CAUTION:
•
Neither the sideguards nor the armrests are to be used for
lifting or carrying the wheelchair.
•
Take care of your fingers when adjusting the arm pad height.
24
Fig. 6.37
Fig. 6.36
2
1
Fig. 6.38
Fig. 6.37
3
SIDE GUARD, FLIP-UP, REMOVABLE WITH SHORT OR
LONG ARMRESTS, HEIGHT-ADJUSTABLE
The armrest can be height adjusted as follows.
Move the lever downwards and move the armrest to the desired
height.
Release the lever and press the armrest downwards until you
hear it click into place. Always check that the sideguards are
correctly engaged.
To flip the armrest up, push the
lever (1) so that the sideguard is
released.
The length of the armrest can be
adjusted by releasing the screws
(2) then push the armrest to the
desired position and re-tighten the
screws (Fig. 6.38).
CAUTION:
• Neither the sideguards nor the armrests are to be used for lifting
or carrying the wheelchair.
• When using a 24" (609.6 mm) rear wheel the armpad must be
moved one level up.
One Hand Operation Armpad
By pressing lever (1) the
height can be adjusted with
one hand.
Fig. 6.39
Fig. 6.38
1
2
Life i
Rev.I
Advertenties
Hoofdstukken
Inhoudsopgave
